1n4001g ? 1n4007g document number: ds29002 rev. 8 - 2 1 of 3 www.diodes.com january 2012 ? diodes incorporated 1n4001g - 1n4007g 1.0a glass passivated rectifier features and benefits ? glass passivated die construction ? high current capability and low forward voltage drop ? surge overload rating to 30a peak ? lead free finish, rohs compliant (note 1) mechanical data ? case: do-41 plastic ? case material: molded plastic. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - tin. pl ated leads solderable per mil-std- 202, method 208 ? polarity: cathode band ? marking: type number ? weight: 0.30 grams (approximate) ordering information (note 2) device packaging shipping 1n4001g-t do-41 plastic 5k/tape & reel, 13-inch 1n4002g-t do-41 plastic 5k/tape & reel, 13-inch 1N4003G-T do-41 plastic 5k/tape & reel, 13-inch 1n4004g-t do-41 plastic 5k/tape & reel, 13-inch 1n4005g-t do-41 plastic 5k/tape & reel, 13-inch 1n4006g-t do-41 plastic 5k/tape & reel, 13-inch 1n4007g-t do-41 plastic 5k/tape & reel, 13-inch maximum ratings and electrical characteristics @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol 1n4001 g 1n4002 g 1n4003 g 1n4004 g 1n4005 g 1n4006 g 1n4007 g unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r ( rms ) 35 70 140 280 420 560 700 v average rectified output current (note 3) @ t a = 75c i o 1.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 30 a forward voltage @ i f = 1.0a v fm 1.0 v peak reverse current @t a = 25c at rated dc blocking voltage @ t a = 125c i rm 5.0 50 a typical reverse recovery time (note 4) t r r 2.0 s typical total capacitance (note 5) c t 8.0 pf typical thermal resistance junction to ambient r ja 100 c/w operating and storage temperature range t j , t stg -65 to +175 c notes: 1. eu directive 2002/95/ec (rohs). all applicable rohs exemptions applied, see eu directive 2002/95/ec annex notes. 2. for packaging details, visit our website at http://www.diodes.com. 3. leads maintained at ambient temperatur e at a distance of 9.5mm from the case. 4. measured with i f = 0.5a, i r = -1a, i rr = 0.25a. 5. measured at 1.0 mhz and applied reverse voltage of 4.0v dc.
1n4001g ? 1n4007g document number: ds29002 rev. 8 - 2 2 of 3 www.diodes.com january 2012 ? diodes incorporated 1n4001g - 1n4007g 40 60 80 100 120 140 160 180 0 0.2 0.4 0.6 0.8 1.0 i, ave r a g e f o r wa r d r e c t i f ied c u r r en t (a) (av) t , ambient temperature (oc) fig. 1 forward current derating curve a 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1.0 i , ins t an t ane o u s f o r wa r d c u r r en t (a) f v , instantaneous forward voltage (v) fig. 2 typical forward characteristics f 10 1 10 100 i, p eak f o r wa r d s u r g e c u r r en t (a) fsm number of cycles at 60 hz fig. 3 max non-repetitive peak fwd surge current 0 10 20 30 c , t o t al c a p a c i t a n c e ( p f ) t v , reverse voltage (v) fig. 4 typical total capacitance r 1.0 10 100 1.0 10 100 t= 25oc f = 1mhz j 0.1 1.0 10 020406080100120140 t = 100c j 100 percent of rated peak reverse voltage (%) fig. 5 typical reverse characteristics
1n4001g ? 1n4007g document number: ds29002 rev. 8 - 2 3 of 3 www.diodes.com january 2012 ? diodes incorporated 1n4001g - 1n4007g package outline dimensions important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhancements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com do-41 plastic dim min max a 25.40 ? b 4.06 5.21 c 0.71 0.864 d 2.00 2.72 all dimensions in mm
|
